Wood Oil Varnish & Finishes

Product Details:

WATCO® Teak Oil is specifically formulated for dense woods such as teak, rosewood or mahogany. WATCO® Teak Oil penetrates deep into wood pores to create the rich, warm glow of a hand-rubbed finish. It takes less than an hour to treat your wood with WATCO® Teak Oil - simply brush or wipe on and wipe off. WATCO® Teak Oil is the choice of fine woodworkers and novices alike. Please read product labels for additional directions and precautions before using

• Outstanding UV and moisture resistant finish.
• Great for marine use above the water line.
• Easy application and maintenance.

Available Size: 946 Ml, 3.78 Ltr.

Additional Information:

• Item Code: A67141

Product Details:

WATCO® Danish Oil is a unique blend of penetrating oil & varnish hardens in the wood, not on the wood. WATCO® Danish Oil penetrates deep into wood pores to protect from within and to enhance the natural look and feel of the wood. It creates the rich, warm glow of a traditional hand-rubbed finish. Many projects can be completed in less than an hour - simply brush or wipe on and wipe off. WATCO® Danish Oil is the choice of fine woodworkers and novices alike. Please read product labels for additional directions and precautions before using

• Indoor use only (Not recommended for Floors).
• Stain, Seals, & Protects in one easy step.
• Will not crack, chip, or peel.

Available Colors: Golden Oak, Cherry, Black Walnut, Fruitwood, Light Walnut, Natural, Dark Walnut, Medium Walnut, Red Mahogany

Available Finish: Gloss, Semi-Gloss, Satin

Additional Information:

• Item Code: 65141

Product Details:

Watco's specially formulated Butcher Block Oil & Finish allows for easy and safe maintenance of wooden butcher blocks, cutting boards, salad bowls and other items which require a food safe finish. Please read product labels for additional directions and precautions before using

• Easy wipe-on application.
• Rich sheen enhances while it protects.

Additional Information:

• Item Code: 241758

Product Details:

WATCO® Rejuvenating Oil restores beauty, warmth and luster to previously oil-finished surfaces. Apply to furniture, trim, paneling or any wood interior surface. Cleans, penetrates, and rejuvenates in 10 minutes. Please read product labels for additional directions and precautions before using

• Provides enriching moisture and oils.
• Simply wipe-on and wipe-off.
• Replenishes and revitalizes.

Available Size: 473 Ml, 946 Ml

Additional Information:

• Item Code: 66051H

Product Details:

WATCO® Satin Finishing Wax gives a hand-rubbed wax appearance without hours of labor. Apply to previously stained wood surfaces or bare wood. Please read product labels for additional directions and precautions before using

• Formulated for bare or oil-finished woods.
• Provides an extra level of protection.
• Wipe-on and buff off.

Available Colors: Dark, Natural

Additional Information:

• Item Code: 67041

Product Details:

Keep tropical hardwoods looking like new with Rust-Oleum® Wolman™ E-H-T® Exotic Hardwood Treatment. This specialized formula maintains the “wet” look of exotic woods, like mahogany, ipe and teak, and restores a fresh appearance to weathered wood.

• Translucent, natural brown tone compliments original hardwood color and maintains a brand-new look.
• Concentrated UV blocker/absorber combination prolongs coating color, resists premature fading, and reduces maintenance.
• Mildew-resistant coating film keeps surface free of mildew stain.

 

Additional Information:

• Item Code: 12206

Product Details:

Give commercial settings a long-lasting, attractive finish with Rust-Oleum Commercial C580 System 150 VOC General Purpose Latex. This low-odor, low-VOC formula is specially formulated to provide a high-hiding, uniform finish on interior walls and ceilings.

Features of the Product:-

• Excellent coverage and hide; makes touch-ups simple
• Applies easily to properly primed wood, drywall, concrete and more
• Durable formula—resists chipping, cracking, peeling and burnishing
• Easy soap-and-water clean-up
• Meets USDA requirements for incidental food contact; accepted for use in federally registered Canadian food facilities; VOC < 150 g/l

APPLICATION

Mix thoroughly before use. Apply only when air, surface, and material temperatures are between 50-90°F (10-32°C), surface is at least 5°F above the dew point and relative humidity is below 85% during and after application. Apply by brush, roller, airless, HVLP or conventional spray. Flow and leveling is best achieved by applying a full, uniform coating and working to a wet edge using overlapping strokes. Do not brush or roll excessively.

Additional Information:

• Item Code: 262608

Product Details:

A traditional wood floor finish. This quality, professional polyurethane is recommended for any interior wood surface where a protective finish is required. With over 50% solids, this product formula leaves a high build protective clear finish ideal for commercial and residential aplications. Pro Finisher Oil Based Polyurethane is resistant to abrasion, alcohol, water, strong sunlight and high traffic. Pro Finisher Oil Base Polyurethane has a slightly richer color than many consumer polyurethanes. This is the result of using higher quality resins and cobalt dryers for better wear resistance and faster drying times.

• Excellent durability and scuff resistance.
• High solids for exceptional build.

Additional Information:

• Item Code: 204662

Product Details:

Rustoleum Finish and Preservative

Enhance and protect exterior wood with Rust-Oleum Wolman F P Finish and Preservative. This deep-penetrating, tinted oil brings out wood’s natural grain while also providing long-term water, UV and mold/mildew protection. Easy to apply. Easy water clean-up.

Wolman F P Finish and Preservative will enhance the color of wood and protect newly installed or existing decks, fences, siding or roofing shakes and shingles, clapboard, exterior doors, window frames and trim, boat docks, boardwalks, arbors and trellises, storage sheds and other outdoor equipment and furniture.

Available Size: 1 Gallon and 5 Gallons.

Experts’ Guidelines

Do not use on wood which will come in contact with food. Keep container closed when not in use. Wear goggles, rubber gloves and protective clothing when applying or handling treated lumber. Use only in a ventilated area. Keep contents and freshly treated articles away from food and living plants.

 

Surface Preparation: Conduct a splash test on bare wood to confirm water absorption before applying this product. Note: Chlorine bleach cleaners alone are not recommended. These products degrade the wood structure, interfering with penetration and adhesion of protective coatings.

Before applying this oil-based product, wait at least 24 hours after cleaning, stripping or power-washing to allow the water-soaked wood to dry out thoroughly. Oil-based finishes will not properly penetrate wood that is water soaked.

NOTE: Read and follow all the instructions carefully mentioned on tin before using.

Available Colors :- Golden Pine, Natural

Additional Information:

• Item Code: 14426

Product Details:

WATCO® Furniture Refinisher is specially formulated to gently dissolve old varnish, wax, lacquer, and shellac without chemicals that may harm wood. WATCO® Furniture Refinisher is an easy, one step way to refinish old furniture, antiques, and fine wood. Simply wipe it on and wipe away the old finish. The wood’s natural beauty is restored.

• Gently dissolves old finishes in one step.
• No stripping or sanding required.
• Preserves wood's original colour.
• Removes clear finish, varnish, lacquer, shellac, wax, and grime.
• No neutralizing or washing is required.

Additional Information:

• Item Code: 266279

Product Details:

WATCO® Tung Oil Finish will quickly and easily restore and enhance the natural color and warmth of wood in only a few steps. Tung Oil Finish deeply penetrates in the surface of stained and unfinished wood to protect from moisture and provide the look of a genuine hand-rubbed finish.

• Enhances natural wood tone.
• Will not darken with age.
• Can be re-applied as needed to bring back luster and refresh the finish.
• Easy application, fast dry time.

Additional Information:

• Item Code: 266634

Product Details:

Rust-Oleum Varathane Wood Refresher

Revitalize faded, dull or worn wood with Rust-Oleum Varathane Wood Refresher. This easy-to-use solution instantly restores a beautiful luster while also adding a clear, hard, protective finish to any wood surface.

Features of the product:-

• Rejuvenates hardwood, factory finished and laminate floors without sanding.
• Quick, easy solution to completely refinishing a floor.
• Beautifies and adds luster to all wood surfaces.
• Gives a clear, hard protective finish.
• Perfect for use after Varathane Refinishing Prep.

 

Additional Information:

• Item Code: 247831