Waterproofing Company in Mumbai, Bangalore, Delhi

Product Details:

Rust-Oleum® NeverWet® is a two-step product system designed to create a moisture repelling barrier on a variety of surfaces. It is suitable for use on metal, wood, aluminum, galvanized metal, PVC, concrete, masonry, asphalt, vinyl siding, fiberglass, canvas, most plastics and more.

• Not intended to be applied to electronic devices or clothing
• Dries to a flat finish
• Durable formulation, ideal for indoor/outdoor conditions
• Dries fast — 30 minutes to touch

Available Colors: Frosted Clear, White, and Silver Gray

Additional Information:

• Item Code: 274232

Product Details:

NeverWet Industrial is a superhydrophobic treatment that dramatically repels water, mud, ice and other liquids. This revolutionary new class of coatings cause water to form nearly perfect spheres which roll off the surface keeping items dry and clean. NeverWet is a two part treatment consisting of a base coat and top coat that work best on wood, metal, concrete and masonry. The treatment dries to a flat milky haze.

• Efficiently coat large equipment.
• More durable than NeverWet aerosols.
• VOC compliant nationwide.
• After base coat is applied, wait 45 minutes and apply top coat. NeverWet will repel water after 30 minutes. Wait 12 hours for optimal performance.
• Ideal applications include winterization of assets, mixing/blending equipment, concrete, conveyors, awnings, walls, and more.

Additional Information:

• Item Code: 277248

Product Details:

• Creates a surface that repels water and oils.
• Repels chemicals such as hydraulic, machine and motor oils.
• Helps manage flow of lubricants, oils and other liquids for easy clean-up.
• Two-part system applies by air atomized spray.
• Covers up to 300 sq. ft./gal.

Surface Preparation

Surfaces must be dry, clean and free of dirt, oil, grease, wax, dust, chalk, rust or any other contaminants that may prevent proper adhesion. Remove all loose or peeling paint. Plaster, concrete block, concrete and masonry surfaces must be cured. Remove all form release and curing agents.

Tips for application

• Mix basecoat thoroughly with a powered mixer or paint shaker. Stir often during use. Thoroughly shake topcoat before use. Remove lid with care.
• Apply only when air and surface temperatures are between 50-90°F (10-32°C) and the relative humidity is not greater than 85%. Dry times may be affected by extremely high or low relative humidity.
• Best results are achieved by spray application detailed in the following chart.

Base Coat - Spray apply a continuous wet film free from sags and runs. Wait 45 minutes.

Additional Information:

• Item Code: 275636

Product Details:

Rust-Oleum Never Wet Fabric DWR

Rust-Oleum Never Wet Fabric DWR is a one-step, super-hydrophobic, water repelling treatment designed to keep items dry longer. This crystal clear formula allows fabrics to breathe, while dramatically repelling water from the surface. Never Wet Fabric DWR preserves items against damaging moisture without changing the look or feel of the fabric. Never Wet Fabric DWR is ideal for use on leather, suede, polyester, cotton/polyester blends and canvas fabrics.

What surfaces it is ideal to use for?

Never Wet Fabric DWR is ideal for use on leather, suede, polyester, cotton/polyester blends and canvas fabrics.

Surface must be cleaned and dry. You please make sure about this before using it.

Some features of the product:

• Easy one step application.
• Crystal clear formula will not change the appearance, texture or breathability of the fabric.
• Protects textiles from water damage.
• Use on polyester, cotton, blends, leather, suede, nylon, wool, denim, velvet, satin, rayon, silk, canvas, and more.
• Protect work boots, gloves, uniforms, patio furniture, vehicle interiors, curtains, boat covers, and much more.

Product Application:

Prior to applying material, test on the fabric in an inconspicuous area for colorfastness. NeverWet Fabric DWR may enrich lighter colored fabric with a slightly darker tone. Pour into a general purpose, hand-held sprayer that sprays an average droplet size of 100 microns (semi-fine mist). For larger applications a standard garden sprayer set to a semi-fine mist may also be used. For OEM applications, air atomized spray or airless spray may be used. Follow the guidelines below. Odorless when dry. Apply coating on the surface until wet. Do not soak or allow to puddle.

Read and follow the instructions carefully printed on tin.

NOTE: If bubbles appear, lightly dab with a clean, lint-free rag. Re-apply seasonally or when needed. Do not use near open flame. Read and follow all the instructions carefully mentioned on tin before using.

Additional Information:

• Item Code: 282073

Product Details:

WATERTITE® Mold & Mildew-Proof™* Waterproofing Paint has a unique oil-base formula that combines a state-of-the-art waterproofing resin with Portland cement to create a coating that stops up to 34 lbs psi of water pressure. It also contains a mildewcide to prevent the growth of mold and mildew for a minimum of five years after application, making it great for basements and other masonry surfaces where mold and mildew can be problematic.

• Mold & Mildew-Proof Waterproofing Paint LIFETIME WATERPROOF GUARANTEE.
• Guaranteed to stop up to 34 psi - twice the strength of latex waterproofers.
• Prevents the growth of mold & mildew on the paint film for 5 years - guaranteed!
• Smooth, non-gritty finish applies easily to wet or dry walls.
• Ultra low odor oil-base formula has even less odor than.
• latex paint.
• Great for basements and other interior/exterior above & below grade masonry surfaces.

Additional Information:

• Item Code: 05001

Product Details:

Repair and prevent leaks on a wide range of demanding surfaces with Rust-Oleum® LeakSeal® Spray. This rubberized coating seals cracks, fills small holes and provides firm-but-flexible protection against moisture and rust on surfaces that need it most.

• Great for gutters, roofs, flashing, ductwork, PVC, masonry, concrete and more.
• Seals leaks and cracks water-tight.
• Paintable finish.

Additional Information:

• Item Code: 265494

Product Details:

Rust-Oleum® LeakSeal® Brush is an easy to use, rubberized protective utility coating designed to fill and seal leaks and cracks. It provides a water-tight, flexible seal that prevents moisture penetration, rust and corrosion.

• Great for gutters, roofs, flashing, ductwork, PVC, masonry, concrete and more.
• High build formula that seals leaks and cracks instantly.
• Ideal for filling large problematic and hard-to-reach areas.

Additional Information:

• Item Code: 271791

Product Details:

Rust-Oleum® LeakSeal® Tape is a self-fusing, silicone repair tape that conforms to any surface while providing a water-tight seal. LeakSeal Tape creates a chemical a moisture resistant barrier that fixes leaky pipes, hoses and insulates frayed electrical wires. It is easy to remove, leaves no sticky residue and protects from corrosion.

• Withstands temperatures -85°F to 500°F.
• Superior strength 700PSI.
• Insulates up to 8,000 volts.

Additional Information:

• Item Code: 275795

Product Details:

Rust-Oleum® NeverWet® Boot & Shoe is a one-step, superhydrophobic, water repelling treatment designed to keep footwear dry longer. This crystal clear formula preserves footwear against damaging moisture without changing the look or feel of the fabric.

• Easy single step trigger spray application
• Crystal clear formula.
• Great for work boots, tennis shoes, dress and casual shoes, and more.
• Ideal for leather, suede, nubuck, canvas and more.
• Coverage will vary depending on fabric: 20-60 sq. ft.

Additional Information:

• Item Code: 280886

Product Details:

Penetrating Acrylic Barriers Multi-Surface – Waterproofing solutions for Acrylic

Protect outdoor surfaces from water damage with Rust-Oleum OKON Multi-Surface Water-Repellant Sealer. With Micro Plug Technology, this acrylic/siloxane blend keeps water out longer than wax-based solutions. Just one application can last one to three years.

Some Features of the product:

• For horizontal/vertical concrete, stucco, brick and wood.
• Prevents the effects of water or freeze/thaw damage—efflorescence, warping, rotting, etc.
• No build-up, clear, non-yellowing; water-based, low VOCs; paintable.

Available Sizes: 1 Ltr., 3.78 Ltr. and 18.9 Ltr.

Additional Information:

• Item Code: OK931

Product Details:

Rustoleum Penetrating Silane/Siloxane OKON S40

Lock out water and its damaging effects on concrete and masonry—even porous surfaces— with Rust-Oleum OKON S-40 Water-Repellant Sealer. This high-performance silane/siloxane formula penetrates deeply and reduces water leakage 100% Ready to use and paintable.

It is designed for vertical surfaces, light weight concrete, normal weight concrete block, mortar joints, porous brick, precast, pre-stressed, poured-in-place, exposed aggregate, and air entrained concrete and horizontal slabs, and above grade concrete wearing surfaces.

Features of the product:

• For use on vertical/horizontal, flat surfaces—old brick, driveways, patios, etc.
• Prevents water efflorescence and freeze-thaw damage; breathable
• Clear, non-yellowing, non-glossy; water-based, low VOCs and very low odor

Suitable for using on: It is suitable for use on exterior walls, sound barriers, sidewalks, ramps, parking decks, bridge decks and industrial floors.

For best result: Apply with a low-pressure airless sprayer.

There are few important things that you must consider:-

OKON S-40 is ready-to-use and should not be diluted. Agitate before use. Avoid application in windy weather. In hot weather, where possible, lightly spray surface with water to cool the surface to prevent flash drying. S-40 is best applied by low-pressure airless spray but can be applied by garden-type sprayer or small areas can be applied by brush or roller.

For airless spray, reduce pressure to 500 psi and use a large tip 0.035 – 0.050” tip. Hold spray tip 12-18 inches from the surface, start at the bottom of the wall and work up with an overlapping horizontal spray pattern to ensure run down of 6 – 8 inches.

NOTE: Read and follow all the instructions carefully mentioned on tin before using.

Additional Information:

• Item Code: OK641

Product Details:

Stop damages of Acrylics with – Acrylic Barriers W-1

Prevent water damage on concrete and masonry with Rust-Oleum OKON W-1 Water-Repellant Sealer. Micro-Plug technology penetrates deeply to effectively plug surface pores, preventing water absorption. Paintable, recoatable and ready to use.

Specialties of the product which make it durable:

• For use on vertical surfaces—cast concrete, tilt-up panels, unglazed brick, etc.
• Prevents efflorescence, freeze-thaw damage, dusting and staining; breathable.
• Clear, non-yellowing; water-based, low VOCs and very low odor.

Guidelines for best results:

Apply using a low-pressure airless spray pump.

OKON W-1 can be applied to most dense concrete surfaces that are unsealed, clean (free of dirt, waxes and oils) and sound. New concrete must be cured for 28 days prior to coating.

Unsealed: W-1 must be able to penetrate the surface. Test the openness of the substrate by sprinkling with water. If the surface turns dark with the water W-1 can be applied.

Clean: Clean exterior surfaces by pressure washing to remove dust, sand or other foreign matter. Vacuum and damp-mop interior surfaces. Remove exterior mildew with JOMAX House Cleaner Mildew Killer or equivalent. Remove efflorescence with suflamic or dilute muriatic acid. Spot cleaning with acid may cause uneven porosity and blotchy appearance.

Available sizes of the product: 1 Gallon (3.7 Liters) and 5 Gallons (18.9 Liters)

Additional Information:

• Item Code: OK911

Product Details:

Rustoleum OKON Penetrating Acrylic Barriers W-2

Prevent water damage on mid-weight porous and textured concrete and masonry with Rust-Oleum OKON W-2 Water-Repellant Sealer. Micro-Plug technology effectively plugs surface pores, preventing water absorption. Paintable, recoatable and ready to use.

• For use on vertical surfaces of medium/normal-weight concrete block
• Prevents water intrusion, efflorescence and freeze-thaw damage; breathable
• Clear, non-yellowing, water-based, low VOCs and very low odor

Features of OKON W-2 Water Repellent Sealer

• Water-based acrylic micro emulsion.
• Non-yellowing.
• Recoatable.
• Paintable.
• Resist high alkalinity.
• Resist chloride salts.
• Resist blushing.

Additional Information:

• Item Code: OK921

Product Details:

Rustoleum OKON PLUGGER – Acrylic Barriers Plugger

OKON PLUGGERis water base, low VOC, acrylic micro emulsion specifically designed to protect both new and existing porous concrete surfaces. The special blend of acrylic resin and water repellent additives provides multiple benefits especially important when protecting very porous CMU.

The acrylic resin reduces the pore size of the substrate thereby reducing the capillary action that draws water into the substrate.

The proprietary water repellent lowers the surface tensions and further counteracts the capillary pull.

Features of the product that everyone likes:

• Water based Acrylic Micro-Emulsions.
• Non-yellowing.
• Re-coatable.
• Paintable.
• Resist high alkalinity.
• Resist chloride salts.
• Resist blushing.

Additional Information:

• Item Code: OK951

Product Details:

Penetrating Silane Siloxane Sealers – S-20

Lock out water and its damaging effects on dense concrete and masonry with Rust-Oleum OKON S-20 Water-Repellent Sealer. This silane/siloxane formula penetrates deeply to create a tough hydrophobic barrier against water invasions. Ready to use and paintable.

Features of the product:

• For use on vertical, flat, dense surfaces—brick/stucco walls, etc.
• Prevents water, efflorescence and freeze-thaw damage; breathable.
• Clear, non-yellowing, non-glossy; water-based, low VOCs and very low odor.

Additional Information:

• Item Code: OK621

Product Details:

RustOleum Wolman Rain Coat Tinted Water Repellent (Water Base)

Wolman Raincoat Plus Water Repellent Toner-Sealer is a premium high performance coating designed to protect all types of wood against water damage and mildew. This water-based formula has a natural color and satin finish that brings out the wood’s natural beauty. It can be used to seal and protect all woods, including difficult-to-coat dense exotic hardwoods such as Ipe and Teak.

Use to protect new or weathered wood from premature graying, mildew growth and water damage, including splitting and warping caused by moisture absorption. Imparts a sheer, wood colored, matte finish in natural wood tones.

Special Features of the product:-

• Contains UV-blocking pigment to stop premature wood graying.
• Long-term water repellency exceeds Federal specifications. Protects against cracking, splitting, warping.
• Mildew-resistant coating film keeps surface free of mildew stain.

For best result: To complete a deck project in just one day, apply one liberal coat of this water-base sealer 1-2 hours after cleaning with a Wolman™ wood cleaner.

Product Application Tips

Before Starting

Test product in an inconspicuous area to ensure desired color and look is achieved (appearance will vary depending on color and condition of the wood). Ensure entire surface is dry and free of dust, dirt and debris. Dampen with fresh water to cool surfaces hot to the touch in direct sunlight. Cover areas not intended to be coated.

Additional Information:

• Item Code: 12326

Product Details:

Rustoleum Zinsser WaterTite Hydraulic Cement

Permanently stop the active flow of water with Rust-Oleum Zinsser WATERTITE Hydraulic Cement for Concrete Masonry. This powerful formula adheres to wet surfaces and expands as it dries to fill deep cracks and holes, creating a watertight seal in just five minutes.

Features of the product:

• Seal deep cracks and holes.
• Adheres to wet surfaces.
• Creates a “watertight” seal in 5 minutes.
• Use for patching or anchoring.

Available in convenient 2.5 lb. carton and 10 lb. pail.

For best result: Sets quickly; only mix as much as you can use in 3–5 minutes.

Tips to use

Mix two parts WaterTite Hydraulic Cement to one part of water. Stir the mixture until it reaches a putty-like paste.

Mixture will begin to set in 3 to 5 minutes. Only mix as much material as you can use at one time. Hold mixture compound in gloved hand until it becomes warm.

Force it firmly into the hole or crack and hold in place for 5 minutes. Immediately trim or brush away any excess cement for a smooth finish.

NOTE: Read and follow all the instructions carefully mentioned on the box before using.

Additional Information:

• Item Code: 05071

Product Details:

Additional Information:

• Item Code: 270267

Product Details:

Polyurethane Sealant for Concrete and Masonry

Seal deep cracks and holes with Rust-Oleum Zinsser WATERTITE Polyurethane Sealant for Concrete and Masonry. This high-performance, one-component, moisture-curing polyurethane formula permanently fills joints and remains flexible over time.

It is a high performance, low modulus, single component, moisture-cured modified polyurethane joint sealant. It is designed to fill deep cracks and holes, seal dynamically moving joints such as expansion and control joints, precise concrete panel joints, tilt-up panel joints, curtain wall joints and perimeter caulking to windows, doors and panels.

It is suitable for use on concrete block, caste-in-place concrete, stucco, till-up, exposed aggregate and slump block.

Features of the product:

• Flexible joint filler, remains flexible over time.
• Fills deep cracks and voids.
• Seals and waterproofs.
• Excellent adhesion.

For best result: Use cement tools to ensure firm contact with the joint interface.

Tips for application

• Apply only when air and surface temperatures are between 40-120°F (4-49°C). It is strongly recommended the material temperature be at least 50°F (10°C) prior to use.
• Colder material will require more effort to dispense material from the cartridge. Insert Polyurethane Sealant tube in a conventional caulk gun. Cut the plastic tip on an angle to the desired opening size.
• Puncture the foil inside plastic tip. Dispense the material into cracks. Apply to cracks ½” wide or less. Cracks over ¼” in depth must be filled with backing material or filler before applying Polyurethane Sealant.
• Use a putty knife to level and smooth the surface. A topcoat can be applied after the sealant has cured for 72 hours.

Additional Information:

• Item Code: 05091

Product Details:

• Contains UV-blocking pigment to stop premature wood graying.
• Long-term water repellency exceeds Federal specifications. Protects against cracking, splitting, warping.
• Mildew-resistant coating film keeps surface free of mildew stain.

• Long term water repellency.
• Protects against cracking, splitting, warping.
• Mildew-resistant coating film keeps wood free of mildew stain.

Additional Information:

• Item Code: 12366
• Port of Dispatch: Jaipur
• Delivery Time: 10-15 Days

Product Details:

Rust-Oleum® NeverWet® Fabric is a one-step, superhydrophobic, water repelling treatment designed to keep items dry longer. This crystal clear formula preserves outdoor items against damaging moisture without changing the look or feel of the fabric.

• Easy single step trigger spray application
• Crystal clear formula.
• Great for shoes, outdoor patio furniture, backpacks, gloves, camping gear, and more.
• Ideal for leather, suede, polyester, cotton/poly blends, and canvas.
• Coverage will vary depending on fabric: 20-60 sq. ft.
• Not recommended for interior carpet & upholstery.

Additional Information:

• Item Code: 278146