Truworth Impex Private Limited
Truworth Impex Private Limited
Dhuleshwar Garden, Jaipur, Rajasthan
SEND SMS
SEND EMAIL

Waterproofing Solutions

Pioneers in the industry, we offer never wet liquid repelling treatment - hydrophobic spray, never wet industrial waterproofing repellent, never wet oleophobic water repellent coating, never wet fabric durable water repellant, rustoleum leak seal waterproof rubber coating spray and leak seal self fusing silicone waterproofing tape - 10 ft from India.

Never Wet Liquid Repelling Treatment - Hydrophobic Spray

Never Wet Liquid Repelling Treatment - Hydrophobic Spray
  • Never Wet Liquid Repelling Treatment - Hydrophobic Spray
Get Best Quote
Approx. Price: Rs 1,550 / Set

Product Details:

Minimum Order Quantity9 Set
Application SurfaceMasonry, Wood, Concrete
State Of MatterLiquid
Packaging Size510 Grams
BrandRust-Oleum

NeverWet Liquid Repelling treatment For metal, wood, Concrete and Fiberglass etc

Rust-Oleum Never Wet is a two-step product system designed to create a moisture repelling barrier on a variety of surfaces. It is suitable for use on metal, wood, aluminum, galvanized metal, PVC, concrete, masonry, asphalt, vinyl siding, fiberglass, canvas, most plastics and more.

Features of the product:

  • Not intended to be applied to electronic devices or clothing.
  • Dries to a flat finish.
  • Durable formulation, ideal for indoor/outdoor conditions.
  • Dries fast — 30 minutes to touch.

For best result: Rust-Oleum Never Wet Top Coat should be reapplied when water no longer rolls off of the surface.

Instructions: Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rustoleum. A test pattern on cardboard is recommended to obtain a feel for the spray pattern. Hold can upright 6-12 from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Continue shake the can between passes. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more base coats a few minutes apart. Allow to dry for at least 30 minutes before applying the topcoat.

NOTE: Please do not use near open flame.

PLEASE BE CAREFUL: If you scrape, sand or remove old paint from any surface, you may release lead paint dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE; ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE.

NOTE: Read and follow the instructions printed on tin carefully before using.

Color:Frosted Clear, White, and Silver Gray

 

Request
Callback


Additional Information:

  • Item Code: 274232
Yes! I am interested

Never Wet Industrial Waterproofing Repellent

Never Wet Industrial Waterproofing Repellent
  • Never Wet Industrial Waterproofing Repellent
Get Best Quote
Approx. Price: Rs 17,100 / Pack

Product Details:

TypesSuperhydrophobic
Application SurfaceMasonry, Wood, Concrete
State Of MatterLiquid
Packaging Size3.78 Ltr.(Base) + 3.78 Ltr. (Top) SET
BrandRust-Oleum


NEVERWET - INDUSTRIAL Gallons – Protects from repel water, mud and ice

NeverWet Industrial is a superhydrophobic treatment that dramatically repels water, mud, ice and other liquids.

This revolutionary new class of coatings cause water to form nearly perfect spheres which roll off the surface keeping items dry and clean. NeverWet is a two part treatment consisting of a base coat and top coat that work best on wood, metal, concrete and masonry. The treatment dries to a flat milky haze.

Features of the product:

  • Efficiently coat large equipment.
  • More durable than NeverWet aerosols.
  • VOC compliant nationwide.
  • After base coat is applied, wait 45 minutes and apply top coat. NeverWet will repel water after 30 minutes. Wait 12 hours for optimal performance.
  • Ideal applications include winterization of assets, mixing/blending equipment, concrete, conveyors, awnings, walls, and more.

This product is intended for air atomized spray application only. This product complies with USDA FSIS regulatory sanitation performance standards for meat and poultry establishments.

What can you do for the best result?

Remove dirt and debris from area to be treated. Cover and mask off areas to avoid overspray. Do not apply by brush or roller. Apply by air atomized spray. Read all the instructions carefully mentioned on tin before using.

NOTE: Read and follow all the instructions carefully mentioned on tin before using.
Request
Callback


Additional Information:

  • Item Code: 277248
Yes! I am interested

Never Wet Oleophobic Water Repellent Coating

Never Wet Oleophobic Water Repellent Coating
  • Never Wet Oleophobic Water Repellent Coating
Get Best Quote
Approx. Price: Rs 11,260 / Litre

Product Details:

Packaging Size3.78 Ltr. (Base Coat)
Packaging TypeTin
BrandRust-Oleum Never Wet

Rustoleum NeverWet Oleophobic Coating

Rust-Oleum NeverWet Oleophobic for OEM applications is a superhydrophobic and oleophobic coating system that repels water and oils from treated surfaces. This revolutionary product causes liquids to roll off of surfaces keeping items clean and dry. Great for use on metal, concrete, masonry, wood and more.

Features of the product:-
  • Creates a surface that repels water and oils.
  • Repels chemicals such as hydraulic, machine and motor oils.
  • Helps manage flow of lubricants, oils and other liquids for easy clean-up.
  • Two-part system applies by air atomized spray.
  • Covers up to 300 sq. ft./gal.

Surface Preparation

Surfaces must be dry, clean and free of dirt, oil, grease, wax, dust, chalk, rust or any other contaminants that may prevent proper adhesion. Remove all loose or peeling paint. Plaster, concrete block, concrete and masonry surfaces must be cured. Remove all form release and curing agents.

Tips for application

  • Mix basecoat thoroughly with a powered mixer or paint shaker. Stir often during use. Thoroughly shake topcoat before use. Remove lid with care.
  • Apply only when air and surface temperatures are between 50-90°F (10-32°C) and the relative humidity is not greater than 85%. Dry times may be affected by extremely high or low relative humidity.
  • Best results are achieved by spray application detailed in the following chart.

Base Coat - Spray apply a continuous wet film free from sags and runs. Wait 45 minutes.

Topcoat – Spray apply several light coats until a cloudy, slightly hazy film is evident. Water repellency will start after 30 minutes with optimum performance after 12 hours.

NOTE: Read and all the instructions carefully printed on tin before using.
Request
Callback


Additional Information:

  • Item Code: 275636
Yes! I am interested

Never Wet Fabric Durable Water Repellant

Never Wet Fabric Durable Water Repellant
  • Never Wet Fabric Durable Water Repellant
Get Best Quote
Approx. Price: Rs 31,260 / Litre

Product Details:

TypesSuperhydrophobic
Application SurfaceFabric
State Of MatterLiquid
Packaging Size3.78 Ltr
BrandRust-Oleum Never Wet

Rust-Oleum Never Wet Fabric DWR

Rust-Oleum Never Wet Fabric DWR is a one-step, super-hydrophobic, water repelling treatment designed to keep items dry longer. This crystal clear formula allows fabrics to breathe, while dramatically repelling water from the surface. Never Wet Fabric DWR preserves items against damaging moisture without changing the look or feel of the fabric. Never Wet Fabric DWR is ideal for use on leather, suede, polyester, cotton/polyester blends and canvas fabrics.

What surfaces it is ideal to use for?

Never Wet Fabric DWR is ideal for use on leather, suede, polyester, cotton/polyester blends and canvas fabrics.

Surface must be cleaned and dry. You please make sure about this before using it.

Some features of the product:

  • Easy one step application.
  • Crystal clear formula will not change the appearance, texture or breathability of the fabric.
  • Protects textiles from water damage.
  • Use on polyester, cotton, blends, leather, suede, nylon, wool, denim, velvet, satin, rayon, silk, canvas, and more.
  • Protect work boots, gloves, uniforms, patio furniture, vehicle interiors, curtains, boat covers, and much more.

Product Application:

Prior to applying material, test on the fabric in an inconspicuous area for colorfastness. NeverWet Fabric DWR may enrich lighter colored fabric with a slightly darker tone. Pour into a general purpose, hand-held sprayer that sprays an average droplet size of 100 microns (semi-fine mist). For larger applications a standard garden sprayer set to a semi-fine mist may also be used. For OEM applications, air atomized spray or airless spray may be used. Follow the guidelines below. Odorless when dry. Apply coating on the surface until wet. Do not soak or allow to puddle.

Read and follow the instructions carefully printed on tin.

NOTE: If bubbles appear, lightly dab with a clean, lint-free rag. Re-apply seasonally or when needed. Do not use near open flame. Read and follow all the instructions carefully mentioned on tin before using.

Request
Callback


Additional Information:

  • Item Code: 282073
Yes! I am interested

Rustoleum Leak Seal Waterproof Rubber Coating Spray

Rustoleum Leak Seal Waterproof Rubber Coating Spray
  • Rustoleum Leak Seal Waterproof Rubber Coating Spray
Get Best Quote
Approx. Price: Rs 750 / Piece

Product Details:

Minimum Order Quantity12 Piece
Surface of ApplicationRoofs , Metal , Plastic , Wood , Concrete
FormAerosol
Packaging Size312 Grams and 340 Grams

Quality Product – Rustoleum LeakSeal

Repair and prevent leaks on a wide range of demanding surfaces with Rust-Oleum LeakSeal Spray. This rubberized coating seals cracks, fills small holes and provides firm-but-flexible protection against moisture and rust on surfaces that need it most.

Splendid features of the product:

  • Rust-Oleum LeakSeal is an easy to use, rubberized protective utility coating designed to fill and seal leaks and cracks.
  • It provides a water-tight, flexible seal that prevents moisture penetration and corrosion.
  • LeakSeal dries to a semi-smooth finish that will not sag or drip, and can be top-coated with latex or oil-based paints.
  • This product is designed for use on metal, aluminum, galvanized metal, PVC, concrete, masonry, asphalt roofing materials, vinyl siding, fiberglass, and more.

Sometimes people have best quality product but they failed to obtain best results. Therefore, below are the tips for the same purpose.

Tips to get best results:-

Remove all dirt and debris from the area to be coated. Wash area with a detergent and water solution, rinse with fresh water, and allow the surface to dry thoroughly. Remove any loose paint or previous coatings with a wire brush or sandpaper. Lightly sand glossy surfaces. Wipe the sanded surface clean when finished.

Use outdoors or in a well-ventilated area such as an open garage. Apply when temperature is between 50-90°F (10-32ºC) and humidity is below 85% to ensure proper drying. Do not apply to surfaces, when heated, exceed 200ºF (93ºC). Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.

  • Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum.
  • A test spray on cardboard is recommended to obtain feel for the spray pattern. Hold can 8-18” from the surface and spray in short even strokes.
  • It is recommended to apply a light first coat. Apply a second heavier coat to ensure proper coverage.
  • A thicker film can be achieved by moving the nozzle closer to the surface.
  • Initial spray may have some foaming or bubbling, but will dissipate as the coating dries. For best results, apply 2 coats. Allow to dry 15-30 minutes between coats.

NOTE: Read and follow the instructions printed on tin carefully before using.

Request
Callback


Additional Information:

  • Item Code: 265495
Yes! I am interested

Leak Seal Self Fusing Silicone Waterproofing Tape - 10 Ft

Leak Seal Self Fusing Silicone Waterproofing Tape - 10 Ft
  • Leak Seal Self Fusing Silicone Waterproofing Tape - 10 Ft
Get Best Quote
Approx. Price: Rs 1,070 / Piece

Product Details:

Minimum Order Quantity6 Piece
Size>4 inch
BrandRustoleum
TypeSingle Sided
UsageWaterproofing, electrical insulation

Waterproofing solution - Rust-Oleum LeakSeal Tape

Rust-Oleum LeakSeal Tape is a self-fusing, silicone repair tape that conforms to any surface while providing a water-tight seal. Leak Seal Tap creates a chemical a moisture resistant barrier that fixes leaky pipes, hoses and insulates frayed electrical wires. It is easy to remove, leaves no sticky residue and protects from corrosion. Meets UL 510 Standards.

Specialities of the product:-

Moisture Resistance - Excellent
Electrical Insulation - Excellent
Resilience - Excellent
High Temperatures - Excellent
UV Resistance - Excellent
Ozone Resistance - Excellent
Corrosion Prevention - Excellent
Flame Resistance - Good
Abrasion Resistance - Good
Tear Resistance - Good
Solvent Resistance - Good
Acid Resistance - Good – Fair
Oil Resistance - Good – Fair
Hydrocarbon Resistance - Good - Fair

For best result:

Dry the substrate before applying the tape. Place the tape on the problem area, hold firmly and stretch (with tension) around the object.

Continue to stretch the tape, overlapping each layer by ½” and wrap over itself to fuse.

Wrap completely over the problem area and cut the tape once finished. Press the end firmly into place. To remove, carefully cut with scissors or knife.

NOTE: Read and follow the instructions mentioned on box carefully beofre using.

Request
Callback


Additional Information:

  • Item Code: 275795
Yes! I am interested

Watertite LX Waterproofing Paint (Latex Based)

Watertite LX Waterproofing Paint (Latex Based)
  • Watertite LX Waterproofing Paint (Latex Based)
Get Best Quote
Approx. Price: Rs 3,940 / Litre

Product Details:

TypesAcrylic
Surface of ApplicationConcrete
FormLiquid
Packaging Size3.78 Ltr
Brandothers

Watertitet ™-LX Mold & Mildew-Proof™* Waterproofing Paint is a multi-purpose, latex-based concrete and masonry waterproofing primer and finish to keep water out and mold & mildew away! It forms an impermeable barrier to water on any interior or exterior, vertical or horizontal concrete and cementitious stucco. The ideal basement waterproofer, it prevents the growth of mold & mildew on the paint film for 5 years.
Request
Callback


Additional Information:

  • Item Code: 270267
Yes! I am interested

Zinsser Water Tile Waterproofing Paint

Zinsser Water Tile Waterproofing Paint
  • Zinsser Water Tile Waterproofing Paint
Get Best Quote
Approx. Price: Rs 6,740 / Litre

Product Details:

TypesMasonry
Surface of ApplicationConcrete, Stucco, cement, cinder block
FormLiquid
Packaging Size3.78 Ltr

Rustoleum Zinsser WATERTITE Mold Mildew-Proof (Oil Based)

WATERTITE Mold Mildew-Proof Waterproofing Paint has a unique oil-base formula that combines a state-of-the-art waterproofing resin with Portland cement to create a coating that stops up to 34 lbs psi of water pressure. It also contains a mildewcide to prevent the growth of mold and mildew for a minimum of five years after application, making it great for basements and other masonry surfaces where mold and mildew can be problematic.

Considerable points

Surfaces must be clean, dry, sound and free of dirt, greases, soap, and other contaminants. New masonry must cure for at least 30 days before applying WaterTite Mold Mildew-Proof Waterproofing Paint.

Salting or efflorescence (a white powdery deposit often found on walls) must be removed with WaterTite Etch and Cleaner or a similar product. Follow manufacturer’s directions and safety precautions. Rinse the surface thoroughly with fresh water.

NOTE: Read and follow the instructions printed on tin carefully before using.
Request
Callback


Additional Information:

  • Item Code: 05001
Yes! I am interested

Watertite Hydraulic Cement

Watertite Hydraulic Cement
  • Watertite Hydraulic Cement
Ask For Price

Product Details:

TypesWaterproofing Coating
ApplicationConstruction
Form of ChemicalsLiquid
Packaging Size4.5 Kg
BrandOthers

Rustoleum Zinsser WaterTite Hydraulic Cement

Permanently stop the active flow of water with Rust-Oleum Zinsser WATERTITE Hydraulic Cement for Concrete Masonry. This powerful formula adheres to wet surfaces and expands as it dries to fill deep cracks and holes, creating a watertight seal in just five minutes.

Features of the product:

  • Seal deep cracks and holes.
  • Adheres to wet surfaces.
  • Creates a “watertight” seal in 5 minutes.
  • Use for patching or anchoring.

Available in convenient 2.5 lb. carton and 10 lb. pail.

For best result: Sets quickly; only mix as much as you can use in 3–5 minutes.

Tips to use

Mix two parts WaterTite Hydraulic Cement to one part of water. Stir the mixture until it reaches a putty-like paste.

Mixture will begin to set in 3 to 5 minutes. Only mix as much material as you can use at one time. Hold mixture compound in gloved hand until it becomes warm.

Force it firmly into the hole or crack and hold in place for 5 minutes. Immediately trim or brush away any excess cement for a smooth finish.

NOTE: Read and follow all the instructions carefully mentioned on the box before using.

Request
Callback


Additional Information:

  • Item Code: 05074
Yes! I am interested

Watertite PU Sealant Concrete Masonry

Watertite PU Sealant Concrete Masonry
  • Watertite PU Sealant Concrete Masonry
Get Best Quote
Approx. Price: Rs 740 / Unit

Product Details:

Surface of Application Concrete and Masonry
Grade StandardIndustrial Grade
Packaging Size298 ml
FeaturesWater Resistant
BrandZinsser

Polyurethane Sealant for Concrete and Masonry

Seal deep cracks and holes with Rust-Oleum Zinsser WATERTITE Polyurethane Sealant for Concrete and Masonry. This high-performance, one-component, moisture-curing polyurethane formula permanently fills joints and remains flexible over time.

It is a high performance, low modulus, single component, moisture-cured modified polyurethane joint sealant. It is designed to fill deep cracks and holes, seal dynamically moving joints such as expansion and control joints, precise concrete panel joints, tilt-up panel joints, curtain wall joints and perimeter caulking to windows, doors and panels.

It is suitable for use on concrete block, caste-in-place concrete, stucco, till-up, exposed aggregate and slump block.

Features of the product:

  • Flexible joint filler, remains flexible over time.
  • Fills deep cracks and voids.
  • Seals and waterproofs.
  • Excellent adhesion.

For best result: Use cement tools to ensure firm contact with the joint interface.

 

Tips for application

  • Apply only when air and surface temperatures are between 40-120°F (4-49°C). It is strongly recommended the material temperature be at least 50°F (10°C) prior to use.
  • Colder material will require more effort to dispense material from the cartridge. Insert Polyurethane Sealant tube in a conventional caulk gun. Cut the plastic tip on an angle to the desired opening size.
  • Puncture the foil inside plastic tip. Dispense the material into cracks. Apply to cracks ½” wide or less. Cracks over ¼” in depth must be filled with backing material or filler before applying Polyurethane Sealant.
  • Use a putty knife to level and smooth the surface. A topcoat can be applied after the sealant has cured for 72 hours.
NOTE: Read and follow all the instructions carefully mentioned on tin before using.
Request
Callback


Additional Information:

  • Item Code: 05091
Yes! I am interested

Wolman Raincoat Tinted Water Repellent

Wolman Raincoat Tinted Water Repellent
  • Wolman Raincoat Tinted Water Repellent
Get Best Quote
Approx. Price: Rs 2,500 / Gallon

Product Details:

Minimum Order Quantity10 Gallon
Application SurfaceWood
State Of MatterLiquid
Packaging Size3.78 Ltr.
BrandRust-Oleum Wolman

Outdoors wood care product - Rain Coat Tinted water repellent

Use to protect new or weathered wood from premature graying, mildew growth and water damage, including splitting and warping caused by moisture absorption. Imparts a sheer, wood colored, matte finish in natural wood tones.

Extraordinary water proofing solution
  • Contains UV-blocking pigment to stop premature wood graying.
  • Long-term water repellency exceeds Federal specifications. Protects against cracking, splitting, warping.
  • Mildew-resistant coating film keeps surface free of mildew stain.

Following are the prime features:
  • Long term water repellency.
  • Protects against cracking, splitting, warping.
  • Mildew-resistant coating film keeps wood free of mildew stain.

Wolman RainCoat
use to protect new or weathered wood from water damage, including splitting and warping caused by water absorption. 100% clear, matte finish reveals original wood color and allows wood to gray naturally.

NOTE: Read and follow the instructions printed on tin carefully before using.
Request
Callback


Additional Information:

  • Item Code: 12366
  • Port of Dispatch: Jaipur
  • Delivery Time: 10-15 Days
Yes! I am interested

Okon Multi Surface

Okon Multi Surface
  • Okon Multi Surface
Get Best Quote
Approx. Price: Rs 700 / Litre

Product Details:

Application SurfaceBrick, Wood, Concrete
State Of MatterLiquid
BrandRust-Oleum

Penetrating Acrylic Barriers Multi-Surface – Waterproofing solutions for Acrylic

Protect outdoor surfaces from water damage with Rust-Oleum OKON Multi-Surface Water-Repellant Sealer. With Micro Plug Technology, this acrylic/siloxane blend keeps water out longer than wax-based solutions. Just one application can last one to three years.

Some Features of the product:

  • For horizontal/vertical concrete, stucco, brick and wood.
  • Prevents the effects of water or freeze/thaw damage—efflorescence, warping, rotting, etc.
  • No build-up, clear, non-yellowing; water-based, low VOCs; paintable.

How you should apply it for the best result?

Multi-Surface is ready-to-use, no thinning is required. It can be applied by brush, roller or garden-type sprayer. Do not pour product onto surface to spread.

Apply a uniform wet coat at the estimated spread rate. It appears milky-white when applied but dries clear. Material that is not absorbed should be back rolled or brushed out to avoid build up.
Do not allow puddles, drips or runs to dry on the surface. Multi-Surface may slightly darken the surface and add a slight sheen. Stop application at expansion joints, walls or breaks defined with masking tape. The surface temperature at time of application is very important.

Available Size: 1 Gallon and 5 Gallon.

How long it can protect acrylic?

It is really a great acrylic waterproofing system, it can protect your acrylic from 1 year to 3 years!

For best result: Apply a uniform wet coat with brush, roller or garden-type sprayer.

NOTE: Read and follow all the instructions carefully printed on tin before using.

Request
Callback


Additional Information:

  • Item Code: OK931
Yes! I am interested

Okon Plugger Surface Water Proofing

Okon Plugger Surface Water Proofing
  • Okon Plugger Surface Water Proofing
Get Best Quote
Approx. Price: Rs 3,440 / Litre

Product Details:

FormLiquid
BrandRust-Oleum

Rustoleum OKON PLUGGER – Acrylic Barriers Plugger

OKON PLUGGERis water base, low VOC, acrylic micro emulsion specifically designed to protect both new and existing porous concrete surfaces. The special blend of acrylic resin and water repellent additives provides multiple benefits especially important when protecting very porous CMU.

The acrylic resin reduces the pore size of the substrate thereby reducing the capillary action that draws water into the substrate.

The proprietary water repellent lowers the surface tensions and further counteracts the capillary pull.

Features of the product that everyone likes:

  • Water based Acrylic Micro-Emulsions.
  • Non-yellowing.
  • Re-coatable.
  • Paintable.
  • Resist high alkalinity.
  • Resist chloride salts.
  • Resist blushing.

Surface Preparation:-

OKON PLUGGER can be applied to most porous concrete surfaces that are unsealed, clean (free of dirt, waxes and oils) and sound. New concrete must be cured for 28 days prior to coating.

Unsealed: PLUGGER must be able to penetrate surface. Test the openness of the substrate by sprinkling with water. If the surface turns dark with the water PLUGGER can be applied.

Clean: Clean surface using oil-free, compressed air to remove loose and foreign matter that could interfere with application or performance of coating. Pressure wash surface to remove dust, sand or other foreign matter.

Allow pressure washed surfaces to dry three days prior to coating. Remove exterior mildew with JOMAX or equivalent. Remove efflorescence with suflamic or dilute muriatic acid. Spot cleaning with acid may cause uneven porosity and blotchy appearance. Rinse the surface thoroughly after chemical cleaning. Un-rinsed acid salts may cause whitish-blotches to appear. Surface can be slightly damp at time of application.

NOTE: Read and follow all the instructions carefully printed on the tin.

Request
Callback


Additional Information:

  • Item Code: OK951
Yes! I am interested

Penetrating Sealers OKON S-20

Penetrating Sealers OKON S-20
  • Penetrating Sealers OKON S-20
Get Best Quote
Approx. Price: Rs 860 / Litre

Product Details:

Surface of ApplicationWood
FormLiquid
BrandRust-Oleum

Penetrating Silane Siloxane Sealers – S-20

Lock out water and its damaging effects on dense concrete and masonry with Rust-Oleum OKON S-20 Water-Repellent Sealer. This silane/siloxane formula penetrates deeply to create a tough hydrophobic barrier against water invasions. Ready to use and paintable.

Features of the product:

  • For use on vertical, flat, dense surfaces—brick/stucco walls, etc.
  • Prevents water, efflorescence and freeze-thaw damage; breathable.
  • Clear, non-yellowing, non-glossy; water-based, low VOCs and very low odor.

Apply it with a low-pressure airless sprayer to obtain the best result.

Product Application Tips:-

OKON S-20 is ready-to-use and should not be diluted. Avoid application in windy weather. In hot weather, where possible, lightly spray surface with water to cool the surface to prevent flash drying.

OKON S-20 is ready-to-use and should not be diluted. Avoid application in windy weather. In hot weather, where possible, lightly spray surface with water to cool the surface to prevent flash drying.

For airless spray use a small to medium size airless pump (- gpm) set at low pressure (500 psi) and a large 0.035”-0.050” tip. Hold spray tip 12-18 inches from the surface, start at the bottom of the wall and work up with an overlapping horizontal spray pattern to ensure run down of 6-8 inches.

Take special care to saturate mortar joints. Do not stop or interrupt the application in the middle of the wall. Stop application only at expansion joints, walls or breaks defined with masking tape.

NOTE: Read and follow all the instructions carefully printed on tin before using.

Request
Callback


Additional Information:

  • Item Code: OK621
Yes! I am interested

OKON S-40 Surface Repellant

OKON S-40 Surface Repellant
  • OKON S-40 Surface Repellant
Get Best Quote
Approx. Price: Rs 1,200 / Litre

Product Details:

Surface of ApplicationWood , Concrete
FormLiquid
BrandRust-Oleum

Rustoleum Penetrating Silane/Siloxane OKON S40

Lock out water and its damaging effects on concrete and masonry—even porous surfaces— with Rust-Oleum OKON S-40 Water-Repellant Sealer. This high-performance silane/siloxane formula penetrates deeply and reduces water leakage 100% Ready to use and paintable.

It is designed for vertical surfaces, light weight concrete, normal weight concrete block, mortar joints, porous brick, precast, pre-stressed, poured-in-place, exposed aggregate, and air entrained concrete and horizontal slabs, and above grade concrete wearing surfaces.

Features of the product:

  • For use on vertical/horizontal, flat surfaces—old brick, driveways, patios, etc.
  • Prevents water efflorescence and freeze-thaw damage; breathable
  • Clear, non-yellowing, non-glossy; water-based, low VOCs and very low odor

Suitable for using on: It is suitable for use on exterior walls, sound barriers, sidewalks, ramps, parking decks, bridge decks and industrial floors.

For best result: Apply with a low-pressure airless sprayer.

There are few important things that you must consider:-

OKON S-40 is ready-to-use and should not be diluted. Agitate before use. Avoid application in windy weather. In hot weather, where possible, lightly spray surface with water to cool the surface to prevent flash drying. S-40 is best applied by low-pressure airless spray but can be applied by garden-type sprayer or small areas can be applied by brush or roller.

For airless spray, reduce pressure to 500 psi and use a large tip 0.035 – 0.050” tip. Hold spray tip 12-18 inches from the surface, start at the bottom of the wall and work up with an overlapping horizontal spray pattern to ensure run down of 6 – 8 inches.

NOTE: Read and follow all the instructions carefully mentioned on tin before using.

Request
Callback


Additional Information:

  • Item Code: OK641
Yes! I am interested

Okon Penetrating Acrylic Barriers W 1

Okon Penetrating Acrylic Barriers W 1
  • Okon Penetrating Acrylic Barriers W 1
Get Best Quote
Approx. Price: Rs 470 / Litre

Product Details:

Application SurfaceConcrete
State Of MatterLiquid
BrandRust-Oleum

Stop damages of Acrylics with – Acrylic Barriers W-1

Prevent water damage on concrete and masonry with Rust-Oleum OKON W-1 Water-Repellant Sealer. Micro-Plug technology penetrates deeply to effectively plug surface pores, preventing water absorption. Paintable, recoatable and ready to use.

Specialties of the product which make it durable:

  • For use on vertical surfaces—cast concrete, tilt-up panels, unglazed brick, etc.
  • Prevents efflorescence, freeze-thaw damage, dusting and staining; breathable.
  • Clear, non-yellowing; water-based, low VOCs and very low odor.

Guidelines for best results:

Apply using a low-pressure airless spray pump.

OKON W-1 can be applied to most dense concrete surfaces that are unsealed, clean (free of dirt, waxes and oils) and sound. New concrete must be cured for 28 days prior to coating.

Unsealed: W-1 must be able to penetrate the surface. Test the openness of the substrate by sprinkling with water. If the surface turns dark with the water W-1 can be applied.

Clean: Clean exterior surfaces by pressure washing to remove dust, sand or other foreign matter. Vacuum and damp-mop interior surfaces. Remove exterior mildew with JOMAX House Cleaner Mildew Killer or equivalent. Remove efflorescence with suflamic or dilute muriatic acid. Spot cleaning with acid may cause uneven porosity and blotchy appearance.

Available sizes of the product: 1 Gallon (3.7 Liters) and 5 Gallons (18.9 Liters)

NOTE: Read and follow all the instructions carefully printed on tin carefully.

Request
Callback


Additional Information:

  • Item Code: OK911
Yes! I am interested

Okon Penetrating Acrylic Barriers W-2 Concrete

Okon Penetrating Acrylic Barriers W-2 Concrete
  • Okon Penetrating Acrylic Barriers W-2 Concrete
Get Best Quote
Approx. Price: Rs 630 / Litre

Product Details:

Application SurfaceConcrete
State Of MatterLiquid
BrandRust-Oleum

Rustoleum OKON Penetrating Acrylic Barriers W-2

Prevent water damage on mid-weight porous and textured concrete and masonry with Rust-Oleum OKON W-2 Water-Repellant Sealer. Micro-Plug technology effectively plugs surface pores, preventing water absorption. Paintable, recoatable and ready to use.

  • For use on vertical surfaces of medium/normal-weight concrete block
  • Prevents water intrusion, efflorescence and freeze-thaw damage; breathable
  • Clear, non-yellowing, water-based, low VOCs and very low odor

Features of OKON W-2 Water Repellent Sealer

  • Water-based acrylic micro emulsion.
  • Non-yellowing.
  • Recoatable.
  • Paintable.
  • Resist high alkalinity.
  • Resist chloride salts.
  • Resist blushing.

FOR BEST RESULTS: Apply using a low-pressure airless spray pump

Tips for product applications:-

For Concrete and Mortar Joints

Concrete and mortar joints must be hard and firm, not loose or sandy. The surface is un-sound if it can be scraped or gouged with a flat screw driver. Unsound mortar or deteriorated concrete should be removed and repaired prior to coating. Cracks and joints must be sealed with flexible sealant. Parapet walls must be capped and backside sealed with a waterproofing membrane. Protect adjacent and underlying surfaces from over spray and rundown.

Applications of the product:

OKON W-2 is ready-to-use, no thinning is required. Surface can be slightly damp, but not wet at time of application. In hot weather, where possible, lightly spray surface with water to cool the surface to prevent flash drying.

It can be applied by garden-type sprayer but is best applied by low-pressure airless spray. Use a small to medium size airless pump (- gpm) at set a low pressure (500 psi) and a 0.025-0.031” tip. Hold spray tip 12-18 inches from the surface. (Warranty jobs require airless spray application.)

Start at the top of the wall and work down with an overlapping horizontal spray pattern. Make multiple application passes at the top of the wall to ensure run down of 3-5 inches down the wall.

NOTE: Read and follow the instructions carefully printed on tin before using.

Request
Callback


Additional Information:

  • Item Code: OK921
Yes! I am interested

Never Wet Water Repelling Treatment For Fabric - Hydrophobic

Never Wet Water Repelling Treatment For Fabric - Hydrophobic
  • Never Wet Water Repelling Treatment For Fabric - Hydrophobic
Get Best Quote
Approx. Price: Rs 2,270 / Milliliter

Product Details:

Type of Material / FabricLeather, suede, polyester, cotton/poly blends, and canvas
Quantity325 ml

Rustoleum Never Wet Fabric Water Repelling

Rust-Oleum NeverWet Fabric is a one-step, superhydrophobic, water repelling treatment designed to keep items dry longer. This crystal clear formula preserves outdoor items against damaging moisture without changing the look or feel of the fabric.

Extra-ordinary features of the product:

  • Easy single step trigger spray application.
  • Crystal clear formula.
  • Great for shoes, outdoor patio furniture, backpacks, gloves, camping gear, and more.
  • Ideal for leather, suede, polyester, cotton/poly blends, and canvas.
  • Coverage will vary depending on fabric: 20-60 sq. ft.
  • Not recommended for interior carpet upholstery.

Spraying conditions

Use outdoors or in a well-ventilated area. Use when temperature is above 50ºF (10ºC) and humidity is below 85% to ensure proper drying. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.

Application: Do not shake. A test spray is recommended to obtain a feel for the spray pattern. Test in an inconspicuous area before application for colorfastness. NeverWet Outdoor Fabric may enrich light material with a slightly darker tone. Rotate nozzle to “ON” position.

Hold the spray bottle 12-16” from surface and coat the entire object until wet. Do not soak or allow to puddle. NOTE: If bubbles appear, lightly dab with a clean, lint-free rag. Re-apply seasonally or when needed. Do not use near open flame.

NOTE: Read and follow all the instructions carefully printed on tin before using.

Request
Callback


Additional Information:

  • Item Code: 278146
Yes! I am interested

Never Wet Shoe

Never Wet Shoe
  • Never Wet Shoe
Get Best Quote
Approx. Price: Rs 2,270 / Milliliter

Product Details:

TypesAcrylic
Application SurfaceBoot and Shoes
State Of MatterLiquid, Spray
Packaging Size325 ml
BrandRustoleum NeverWet


Rustoleum Never Wet Boot and Shoe Water Repelling Treatment

A great Water Repelling Treatment for Shoe and Boot!

Rust-Oleum Never Wet Boot Shoe is a one-step, super hydrophobic, water repelling treatment designed to keep footwear dry longer. This crystal clear formula preserves footwear against damaging moisture without changing the look or feel of the fabric.

How product takes care of Boot and Shoe?

This crystal clear formula allows fabric to breathe, while dramatically repelling from the surface. NeverWet Outdoor Fabric preserves footwear against damaging moisture without changing the lock or feel.

NOTE: NeverWet Boot and Shoe is ideal on leather, suede, Nubuck, Canvas and more. It is suitable for use on work boots, tennis shoes, dress and casual shoes.

Features of the product:

  • Easy single step trigger spray application.
  • Crystal clear formula.
  • Great for work boots, tennis shoes, dress and casual shoes, and more.
  • Ideal for leather, suede, nubuck, canvas and more.
  • Coverage will vary depending on fabric: 20-60 sq. ft.

Spraying conditions

Use outdoors or in a well-ventilated area. Use when temperature is above 50ºF (10ºC) and humidity is below 85% to ensure proper drying. Avoid spraying in very windy and dusty conditions.

Tips for application: Do not shake. A test spray is recommended to obtain a feel for the spray pattern. Test in an inconspicuous area before application for colorfastness. NeverWet Boot Shoe may enrich light material with a slightly darker tone. Rotate nozzle to “ON” position.

NOTE: Read and follow all the instructions carefully printed on tin before using.

Request
Callback


Additional Information:

  • Item Code: 280886
Yes! I am interested

Rust Oleum Wolman Wood Rain Coat

Rust Oleum Wolman Wood Rain Coat
  • Rust Oleum Wolman Wood Rain Coat
Get Best Quote
Approx. Price: Rs 3,060 / Litre

Product Details:

State/FormLiquid
Surface of ApplicationWood
BrandRust-Oleum

RustOleum Wolman Rain Coat Tinted Water Repellent (Water Base)

Wolman Raincoat Plus Water Repellent Toner-Sealer is a premium high performance coating designed to protect all types of wood against water damage and mildew. This water-based formula has a natural color and satin finish that brings out the wood’s natural beauty. It can be used to seal and protect all woods, including difficult-to-coat dense exotic hardwoods such as Ipe and Teak.

Use to protect new or weathered wood from premature graying, mildew growth and water damage, including splitting and warping caused by moisture absorption. Imparts a sheer, wood colored, matte finish in natural wood tones.

Special Features of the product:-

  • Contains UV-blocking pigment to stop premature wood graying.
  • Long-term water repellency exceeds Federal specifications. Protects against cracking, splitting, warping.
  • Mildew-resistant coating film keeps surface free of mildew stain.

For best result: To complete a deck project in just one day, apply one liberal coat of this water-base sealer 1-2 hours after cleaning with a Wolman™ wood cleaner.

Product Application Tips

Before Starting

Test product in an inconspicuous area to ensure desired color and look is achieved (appearance will vary depending on color and condition of the wood). Ensure entire surface is dry and free of dust, dirt and debris. Dampen with fresh water to cool surfaces hot to the touch in direct sunlight. Cover areas not intended to be coated.

Product Application: Test product in an inconspicuous area to ensure desired color and look is achieved (appearance will vary depending on color and condition of the wood). Ensure entire surface is dry and free of dust, dirt and debris. Dampen with fresh water to cool surfaces hot to the touch in direct sunlight. Cover areas not intended to be coated.

NOTE: Read and follow all the instructions carefully mentioned on tin before using.
Request
Callback


Additional Information:

  • Item Code: 12326
Yes! I am interested
X
Looking for “Waterproofing Solutions”?


Reach Us
Saurabh Mundra
10-B, Truworth House Dhuleshwar Garden, C Scheme
Jaipur- 302001, Rajasthan, India


Call Us

Send E-mail

Send SMS